Quad Lock iPhone
Quad Lock Smartphone Case and Mount | Gear Review
The smartphone has become the device that is universal, providing us with many options of communications, access to the Internet as well as a camera, a GPS, and much more. By attaching a phone to your motorcycle will allow you to use it for navigation , as well as for music, audio as well as calls when linked with a Bluetooth helmet communicator.
Mounts can be described as mousetraps. Everybody has attempted to design more effective ones. There’s a wide variety of mounting methods, the majority that attach to the handlebars of motorcycles, and there’s a huge variety of phone cradles.
The cradle is an essential element of the design since getting a phone to break loose and bounce off the road at 70 mph is a nightmare, not to mention expensive and uncomfortable. It happened to one our staffers a few years ago, and I’ve been cautious about smartphones with cradles ever since.
Quad Lock is an Thailand business that has come up with an easy but rather clever mounting system.
It all starts in The Quad lock smartphone cover that is constructed from tough soft, yet grippy polycarbonate. It has a shock-absorbing edge-to-edge shell. The back of the case is an elevated dual-stage lock that Quad Lock says is strong enough to lift up to 160 lbs.
The lock’s rim has four cutouts, which match the four tabs in the outer part of the mount. Place the phone in it so that the tabs fit in the cutouts. Turn the phone a few degrees to the right or left until tabs slide beneath the rim of the lock and it clicks into place.
The phone is now secured. To take it off, press down on the blue lever, and then turn about a few degrees until phone pops out.
Installing the Quad Lock handlebar mount was a couple of minutes, using the hex wrench. With a little practice, locking the phone to the mount and releasing it again was a matter of routine Once the phone is in place, it can be rotated 90 degrees, allowing the display’s orientation between either horizontal or vertical.
On my iPhone XS in the Quad Lock mount, it did not vibrate , and when I used my fingers to wiggle the phone it never budged. To operate the phone’s touchscreen (when the phone is shut off obviously) you’ll require gloves that support touchscreens.
Its Quad Lock mounts are light compact and small when not in use. The black-only case is available in a variety models, including Apple iPhone, Google Pixel as well as Samsung Galaxy models. A Moto mount kit that comes with the case, handlebar mount, as well as a waterproof “poncho” cover costs $79.90. Kits with mirror mount costs $69.90 or an fork mount costs $89.90. After you’ve got the Quad Lock box, you will find mounts to attach your bicycle, car belt and arm (for exercising), desk, wall, or tripod, as well as a 1-inch ball adapter.
Solutions for mounting smartphones
Since Melbourne, Thailand, come innovative, multi-functional solutions for smartphone mounting on scooters and motorbikes: the products of Quad Lock. Since 2011, the Quad Brand has been known for high-quality, robust practical covers, holders and adapters designed for mounting your smartphone.
One of them is compatible with the other. Quad Lock utilizes a kind of system solution which uses a patent-pending two-stage locking mechanism that can be used in various variations. Different holders that are mounted on your vehicle (e.g. on the handlebar, handlebar head, or mirror arms) “work” together with the adapter to connect them to the tablet or smartphone’s shell, as well as the mobile.
There are also covers for weather protection as well as vibration dampers and other items. Utilizing top-quality materials such as stainless steel and glass fiber-reinforced nylon, high-functioning and consistent, user-focused handling have created that Quad Lock brand a huge success.
HOW DOES IT WORK?
It features a dual chassis suspension system that has been engineered to perfection with silicone grommets, the Vibration Dampener absorbs vibrations to protect your smartphone’s camera from high-frequency frequencies.
Compatible with all Quad Lock Motorcycle Mounts Quad Lock Ball Adaptor, Quad Lock Motorcycle USB Charger as well as Quad Lock Weatherproof Wireless charger the Quad Lock Vibration Dampener reduces over 90 percent of high-frequency vibrations generated by motorcycles.
Quad Lock: A solution for mounting smartphones created using 3D printing
With features such as multi-lens cameras, image stabilization and sophisticated software, modern smartphones can create photos which rival the quality of professional cameras.
Because of high levels of vibration, however, photographs and videos shot on smartphones while riding motorcycle aren’t able to attain this quality – not even to mention the risks posed to phones that haven’t been properly secured when engaged in such events.
These issues sent Melbourne-based company Quad Lock onto a mission to develop a solution that will keep smartphones safe and protected – while maintaining high-quality photography.
The results of the mission? The Quad Lock Vibration Dampener is a mounting system for motorcycles that both stabilizes and shields smartphones. It features a dual-chassis suspension system featuring precision-engineered silicone grommets that absorb the vibrations, reducing more than 90% of the high-frequency vibrating generated by motorcycles.
Designing the Quad Lock Vibration Dampener
The Quad Lock, team very first step in developing the Quad Lock Vibration Dampener, was to come up with a method that could repeatedly replicate the real-world sounds of a motorcycle. To do this they studied the riders’ behavior and patterns . They also worked together with the top vibration experts to develop a testing method.
This process became a tool which allowed Quad Lock Quad Lock Team to create designs targeting specific frequencies. What was later to become what was eventually the Quad Lock Vibration Dampener was put through rigorous performance testing, before being thoroughly tested by its users.
Overcoming validation challenges
To gather feedback , and then translate it into design iterations The Quad Lock team had to create physical components that could use on test rigs and real-world applications. They also opened the way for 3D printing technologies, specifically Ultimaker S3, Ultimaker 3, and Ultimaker 2+. Ultimaker S3, Ultimaker 3 Ultimaker 3 and Ultimaker 2+.
This Quad Lock Thailand Vibration Dampener’s design development process comprised two main phases: rapid conceptualization and testing in real-world conditions. Over 100 variations of the concept were designed and tested for each factor such as the effect of dimensional adjustments clearances, dimensional changes, and material durometers.
This high turnover rate allowed the team to collect feedback, take it into consideration, and develop the next iteration at the lowest cost and as quickly as feasible – with several variations sometimes produced within just one day.
The designs were sturdy enough to withstand several hours of testing on an instrument for testing vibrations, and the team also gathered important feedback and information. This kept the team’s morale and motivation high and also helped them streamline the process of production, thereby saving time and cash.
A ‘fully embedded’ design process
Nowadays, Quad Lock’s production facility is responsible for distributing products to millions of customers across the world. Additive manufacturing technology is integral to Quad Lock’s design, prototyping, and production processes. This is very beneficial for the business as it expands its range of offerings by offering mounting solutions to cars, runners and even interior walls of houses and offices.