Pipe relining is a modern and cost-effective solution to unblock sewage drains. The process involves creating a new pipeline within the existing one, using a specially designed liner infused with resin. This new pipeline is a seamless replacement without excavating or demolishing the existing structure. You can Unblock Sewage Drains by Pipe Relining with the help of a relining company in the following steps.
Step 1: Inspection
Before proceeding with pipe relining, inspect the sewage drain to determine the location and cause of the blockage. You can use cameras and other equipment that provide a clear view of the interior of the pipes. It is essential to identify the blockage to ensure that pipe relining is the most appropriate solution for unblocking the drain.
Step 2: Cleaning the drain
Once the location of the blockage has been determined, the next step is to clean the drain. It will help to remove any debris and other obstructions that may be present in the pipes and will allow for a smoother application of the liner. You can do it by using high-pressure water jets, which can effectively remove any blockages and help to prepare the surface for the resin to adhere properly.
Step 3: Measuring the pipe and cutting the liner
After cleaning the drain, it is crucial to measure the pipe to determine the size of the liner. You must use special equipment to ensure the liner fits snugly within the existing pipeline. Once the size of the liner has been determined, it is time to cut it to size. You can use a special cutting tool, and it is essential to ensure that the liner is cut to the correct length and width. The liner should be slightly smaller than the diameter of the pipe to allow room for the resin to be applied.
Step 4: Applying the resin
The resin is the substance that will bond the liner to the existing pipes and create a seamless pipeline. The resin is applied to the liner using a special brush, and it is essential to ensure that it is evenly spread over the entire surface of the liner. It should be allowed to cure for a set period, typically around 20 minutes, depending on the resin used.
Step 5: Inserting the liner
Once the resin has cured, the liner can be inserted into the existing pipes. It is typically done using a specific tool that pushes the liner into place, and it is crucial to ensure that the liner is inserted evenly and straight. The liner should be left in place for a set period, typically around 2 hours, to allow the resin to cure and bond with the existing pipes fully.
Step 6: Removing the inflatable tube
Once the liner has cured, the next step is to remove the inflatable tube used to insert the liner into place. You must use a special tool. Removing the tube slowly and carefully is essential to avoid damaging the newly installed liner.
Step 7: Reinstating the drain
Once the inflatable tube has been removed, the drain can be reinstated and tested to ensure it functions correctly. You can flush water down the drain and check for leaks or blockages. If everything is working as it should, the drain can be used typically, with the newly installed liner providing a seamless and long-lasting solution to the blockage.
In conclusion, you can consult a relining company to Unblock Sewage Drains by Pipe Relining. After all, it is a highly effective solution. The process is fast, cost-effective, and requires minimal excavation or demolition, making it an ideal solution for many different properties and buildings.